tsgqc_GUI.m

          if error1 ~= -1
            automaticQC( hMainFig );
          end
          
        case 5
          if ~isempty( tsg.SSPS )
            error2 = readBucketData(     hMainFig, fullFileName );
          else
            msgbox( 'Load a TSG file before a Water sample file', 'Read Bucket');
          end

        case 6
          if ~isempty( tsg.SSPS )
            error2 = readCoriolisData(   hMainFig, fullFileName );
          else
            msgbox( 'Load a TSG file before a Water sample file', 'Read Bucket');
          end

        otherwise
          return;

      end

      % A TSG file has been read. Plot the data.
      % ----------------------------------------
      if error1 ~= -1

        % A TSG file has been open and read
        % ---------------------------------
        set( hOpenMenu, 'UserData', 'on' );
        
        % enable toolbar menu pushtool
        % ----------------------------
        hdl_pushtool = findobj('-regexp','Tag', 'PUSHTOOL_');
        set(hdl_pushtool, 'Enable', 'on');
        
        % enable Save menu
        % ----------------
        set(hSaveMenu, 'Enable', 'on');

        % update the filename display
        % ---------------------------
        set( hInfoFileText, 'String', strcat(tsg.file.name, tsg.file.ext));
        
        % update some fields in tsg structure
        % -----------------------------------
        updateTsgStruct(hMainFig);
        
        % Running average of TSG time series
        % ----------------------------------
        tsg_moveaverage(hMainFig);

        % The callback to detect the mouse motion can be set to on
        % --------------------------------------------------------
        set( hMainFig, 'UserData', 'ButtonMotionOn');
        
        % Update QC statistics
        % --------------------
        display_QC( hMainFig, hPlotAxes)

      end
    end
    
    % Get application data
    % --------------------
    tsg = getappdata( hMainFig, 'tsg_data');

    % Merge bucket and external samples
    % ---------------------------------
    if ~isempty( tsg.SSPS_WS ) || ~isempty( tsg.SSPS_EXT )
      tsg_mergesample( hMainFig );
      tsg = getappdata( hMainFig, 'tsg_data');
    end
    
    % Draw the 3 plots of the validation figure 
    % -----------------------------------------
    plot_Validation( hMainFig, hPlotAxes, 1 );
    plot_Validation( hMainFig, hPlotAxes, 2 );
    plot_Validation( hMainFig, hPlotAxes, 3 );

    % Pointer reset to arrow
    % ----------------------
    set( hMainFig, 'Pointer', 'arrow' );

  end

%% Inter_OnMenuCallback ................................... Interpolation
  %----------------------------------------------------------------------
  % Callback function run when 
  %
  function Inter_OnMenuCallback( hObject, eventdata)
      
  
    % Activate or desactivate uipanels
    % --------------------------------
    set( hpCalCoef,            'Visible', 'off' );
    set( hbgQc,                'Visible', 'off' );
    set( hpDateLimit,          'Visible', 'on' );
    set( hpInterpPos,          'Visible',  'on' );
    
    % Pushbutton
    % ----------
    set( hTimelimitToggletool, 'enable',  'on' );
    set( hQCToggletool,        'enable', 'off' );
    set( hClimToggletool,      'enable', 'off' );
    set( hBottleToggletool,    'enable', 'off' );
    set( hCalToggletool,       'enable', 'off' );
    set( hHeaderPushtool,      'enable', 'off' );
   
    % Draw the 3 plots of the interpolation figure 
    % --------------------------------------------
    plot_Interpolation( hMainFig, hPlotAxes, 1 );
    plot_Interpolation( hMainFig, hPlotAxes, 2 );
    plot_Interpolation( hMainFig, hPlotAxes, 3 );
    
  end

%% Inter_OffMenuCallback .................................. Interpolation
  %----------------------------------------------------------------------
  % Callback function run when 
  %
  function Inter_OffMenuCallback( hObject, eventdata)
    
    % Activate or desactivate uipanels
    % --------------------------------
    set( hpCalCoef,            'Visible', 'off' );
    set( hbgQc,                'Visible', 'on');
    set( hpDateLimit,          'Visible', 'off' );
    set( hpInterpPos,          'Visible',  'off' );
    
    % Enable Pushbuttons
    % ------------------
    set( hQCToggletool,        'enable', 'on' );
    set( hTimelimitToggletool, 'enable',  'off' );
    set( hClimToggletool,      'enable', 'on' );
    set( hBottleToggletool,    'enable', 'on' );
    set( hCalToggletool,       'enable', 'on' );
    set( hHeaderPushtool,      'enable', 'on' );

    % Draw the 3 plots of the validation figure 
    % -----------------------------------------
    plot_Validation( hMainFig, hPlotAxes, 1 );
    plot_Validation( hMainFig, hPlotAxes, 2 );
    plot_Validation( hMainFig, hPlotAxes, 3 );
    
  end

%% InterpLinearCallback ...............................Interpolation Linear
  %------------------------------------------------------------------------
  % Callback function run when 
  %----------------------------------------------------------------------
  function InterpPosLinearCallback( hObject, eventdata)

    msgbox( 'Method not yet implemented', ...
      'Function InterpLinearCallback', ...
      'warn',...
      'modal' );


    % Get the time limits for the correction A TESTER
    % --------------------------------------
    dateMin = datenum(get( hetDateMin, 'String'), 'yyyy-mm-dd HH:MM:SS');
    dateMax = datenum(get( hetDateMax, 'String'), 'yyyy-mm-dd HH:MM:SS');
    
    switch error

      case 1

        % Plot in the 3 axes
        % ------------------
        plot_Correction( hMainFig, hPlotAxes );

      case -1
        msgbox( 'Date limits are not correct',...
          'Correction module', 'warn', 'modal');
    end


  end

%% InterpOtherCallback ...............................Interpolation Linear
  %------------------------------------------------------------------------
  % Callback function run when 
  %----------------------------------------------------------------------
  function InterpPosOtherCallback( hObject, eventdata)

    msgbox( 'Method not yet implemented', ...
            'Function InterpOtherCallback', ...
            'warn',...
            'modal' );
  end

%% Cal_OnMenuCallback ..................................... Calibration
  %----------------------------------------------------------------------
  % Callback function run when 
  %----------------------------------------------------------------------
  function Cal_OnMenuCallback( hObject, eventdata)
   
    % Activate or desactivate uipanels
    % --------------------------------
    set( hpCalCoef, 'Visible', 'on' );
    set( hbgQc,     'Visible', 'off');
    
    % Pushbutton
    % ----------
    set( hQCToggletool,     'enable', 'off' );
    set( hClimToggletool,   'enable', 'off' );
    set( hBottleToggletool, 'enable', 'off' );
    set( hInterpToggletool, 'enable', 'off' );
    set( hHeaderPushtool,   'enable', 'off' );
   
    % Draw the 3 plots of the validation figure 
    % -----------------------------------------
    plot_Calibration( hMainFig, hPlotAxes, 1 );
    plot_Calibration( hMainFig, hPlotAxes, 2 );
    plot_Calibration( hMainFig, hPlotAxes, 3 );
        
    % Get tsg application data
    % ------------------------
    tsg = getappdata( hMainFig, 'tsg_data' );
    
    % Write the Cal Coef in the Editable uicontrol
    % --------------------------------------------
    if isempty( tsg.CNDC_LINCOEF )
      set( hetCalCNDCSlope,  'String', '1');
      set( hetCalCNDCOffset, 'String', '0');
    else
      set( hetCalCNDCSlope,  'String', num2str(tsg.CNDC_LINCOEF(1)));
      set( hetCalCNDCOffset, 'String', num2str(tsg.CNDC_LINCOEF(2)));
    end

    if isempty( tsg.SSJT_LINCOEF )
      set( hetCalSSJTSlope,  'String', '1');
      set( hetCalSSJTOffset, 'String', '0');
    else
      set( hetCalSSJTSlope,  'String', num2str(tsg.SSJT_LINCOEF(1)));
      set( hetCalSSJTOffset, 'String', num2str(tsg.SSJT_LINCOEF(2)));
    end

  end


%% Cal_OffMenuCallback ..................................... Calibration
  %----------------------------------------------------------------------
  % Callback function run when 
  %----------------------------------------------------------------------
  function Cal_OffMenuCallback( hObject, eventdata)
  
    % Activate or desactivate uipanels
    % --------------------------------
    set( hpCalCoef, 'Visible', 'off' );
    set( hbgQc,     'Visible', 'on');
    
    % Enable Pushbuttons
    % ------------------
    set( hQCToggletool,     'enable', 'on' );
    set( hClimToggletool,   'enable', 'on' );
    set( hBottleToggletool, 'enable', 'on' );
    set( hInterpToggletool, 'enable', 'on' );
    set( hHeaderPushtool,   'enable', 'on' );
        
    % Get tsg application data
    % ------------------------
    tsg = getappdata( hMainFig, 'tsg_data' );
    
    % Save the calibration coefficient
    % --------------------------------
    tsg.CNDC_LINCOEF(1) = str2num(get( hetCalCNDCSlope, 'String'));
    tsg.CNDC_LINCOEF(2) = str2num(get( hetCalCNDCOffset, 'String'));
    tsg.SSJT_LINCOEF(1) = str2num(get( hetCalSSJTSlope, 'String'));
    tsg.SSJT_LINCOEF(2) = str2num(get( hetCalSSJTOffset, 'String'));
        
    % Save tsg application data
    % --------------------------
    setappdata( hMainFig, 'tsg_data', tsg );
    
    % Draw the 3 plots of the validation figure 
    % -----------------------------------------
    plot_Validation( hMainFig, hPlotAxes, 1 );
    plot_Validation( hMainFig, hPlotAxes, 2 );
    plot_Validation( hMainFig, hPlotAxes, 3 );
   
  end

%% CalibrateCallback .......................................... Calibration
  function CalibrateCallback(hObject, eventdata)
    % Callback function run when
    
    % Get tsg application data
    % ------------------------
    tsg = getappdata( hMainFig, 'tsg_data' );
    
    % Get the calibration coefficients. 
    % They will be used in the function calibration
    % ---------------------------------------------
    tsg.CNDC_LINCOEF(1) = str2num(get( hetCalCNDCSlope, 'String'));
    tsg.CNDC_LINCOEF(2) = str2num(get( hetCalCNDCOffset, 'String'));
    tsg.SSJT_LINCOEF(1) = str2num(get( hetCalSSJTSlope, 'String'));
    tsg.SSJT_LINCOEF(2) = str2num(get( hetCalSSJTOffset, 'String'));
        
    % Save tsg application data
    % --------------------------
    setappdata( hMainFig, 'tsg_data', tsg );

    % Calibrate the sensors
    % ---------------------
    calibration( hMainFig );
    
    % Update the Adjusted variables (SSPS - SSJT) with calibrated records
    % -------------------------------------------------------------------
    updateAdjustedVariable( hMainFig );
    
    % Refresh plot #1
    % ---------------
    plot_Calibration( hMainFig, hPlotAxes, 1 );
    plot_Calibration( hMainFig, hPlotAxes, 2 );
    
    % As soon as a modification took place the data should be saved
    % -------------------------------------------------------------
    set( hSaveMenu, 'UserData', 'on' );

  end

%% CancelCalibrationCallback .................................. Calibration
  function CancelCalibrationCallback(hObject, eventdata)
    % Callback function run when
    
    % Get tsg application data
    % ------------------------
    tsg = getappdata( hMainFig, 'tsg_data' );
        
    tsg.SSPS_CAL = [];
    tsg.SSJT_CAL = [];
    
    % Update the Adjusted variables (SSPS - SSJT) with calibrated records
    % -------------------------------------------------------------------
    updateAdjustedVariable( hMainFig );
    
    % Save tsg application data
    % --------------------------
    setappdata( hMainFig, 'tsg_data', tsg );
    
    % Refresh plot #1
    % ---------------
    plot_Calibration( hMainFig, hPlotAxes, 1 );
    plot_Calibration( hMainFig, hPlotAxes, 2 );
    
    % As soon as a modification took place the data should be saved
    % -------------------------------------------------------------
    set( hSaveMenu, 'UserData', 'on' );

  end

%% Zoom_OffMenuCallback
  %----------------------------------------------------------------------
  % Callback function run when the zoom toggle toolbar is released
  %----------------------------------------------------------------------
  function Zoom_OffMenuCallback(hObject, eventdata)
    
    % turns interactive zooming off
    % -----------------------------
    zoom off;
 
    % Set the right limit and interval to the 3 axes
    % ----------------------------------------------
    for iaxe = 1:3
      set(hPlotAxes(iaxe),'XTickMode','auto')
      datetick(hPlotAxes(iaxe),'x','keeplimits')
    end
    
    % Turns off the automatic adaptation of date ticks
    % ------------------------------------------------
    zoomAdaptiveDateTicks('off');
    
  end

%% Zoom_OnMenuCallback
  %----------------------------------------------------------------------
  % Callback function run when the zoom toggle toolbar is released
  %----------------------------------------------------------------------
  function Zoom_OnMenuCallback(hObject, eventdata)
    
    % cursor back to normal
    % ---------------------
    set(hMainFig,'Pointer','arrow');
    
    % returns a zoom mode object for the figure hMainFig handle
    % --------------------------------------------------------
    hZoom = zoom(hMainFig);
    
    % Disallows a zoom operation on the MAP axes objects
    % --------------------------------------------------
    setAllowAxesZoom(hZoom, hPlotAxes(4), false);

    % turns on interactive zooming (same effect than zoom on) but prevent
    % side effect on another figure
    % -------------------------------------------------------------------
    set(hZoom,'enable', 'on');
    %zoom on;
    
    % Turns on the automatic adaptation of date ticks
    % -----------------------------------------------
    zoomAdaptiveDateTicks('on');
 
    % Desactivate some toggle buttons
    % -------------------------------
    set( hQCToggletool,  'state', 'off' );
    set( hPanToggletool, 'state', 'off' );
    set( hTimelimitToggletool, 'state', 'off' );
   
  end

%% Pan_OffMenuCallback
  %----------------------------------------------------------------------
  % Callback function run when the pan toggle toolbar is released
  %----------------------------------------------------------------------
  function Pan_OffMenuCallback(hObject, eventdata)
    
    % turns interactive pan off
    % -------------------------
    pan off;
    
    % Set the right limit and interval to the 3 axes
    % ----------------------------------------------
    for iaxe = 1:3
      set(hPlotAxes(iaxe),'XTickMode','auto')
      datetick(hPlotAxes(iaxe),'x','keeplimits')
    end
 
    % Turns off the automatic adaptation of date ticks
    % ------------------------------------------------
    panAdaptiveDateTicks('off');
    
  end

%% Pan_OnMenuCallback
  %----------------------------------------------------------------------
  % Callback function run when the pan toggle toolbar is selected
  %----------------------------------------------------------------------
  function Pan_OnMenuCallback(hObject, eventdata)
    
    % cursor back to normal
    % ---------------------
    set(hMainFig,'Pointer','arrow');
    
    % Returns a pan mode object for the figure handle
    % -----------------------------------------------
    hPan = pan(hMainFig);
    
    % Disallows a pan operation on the MAP axes objects
    % --------------------------------------------------
    setAllowAxesPan(hPan, hPlotAxes(4), false);

    % turns on interactive pan (same effect than pan on) but prevent
    % side effect on another figure
    % --------------------------------------------------------------
    set(hPan,'enable', 'on');
    
    % Turns on the automatic adaptation of date ticks
    % -----------------------------------------------
    panAdaptiveDateTicks('on');
   
    % Desactivate some toggle buttons
    % -------------------------------
    set( hQCToggletool,   'state', 'off' );
    set( hZoomToggletool, 'state', 'off' );
    set( hTimelimitToggletool, 'state', 'off' );
    
  end

%% QC_OnMenuCallback ............................... Quality Control Module
  %----------------------------------------------------------------------
  % Callback function run when the QC toggle tool is pressed
  %----------------------------------------------------------------------
  function QC_OnMenuCallback(gcbo, eventdata)
    
    % Desactivate toggletools.
    % ------------------------
    set( hZoomToggletool,       'state', 'off' );
    set( hPanToggletool,        'state', 'off' );
    set( hTimelimitToggletool,  'state', 'off' );
    set( hCalToggletool,        'state', 'off' );
    set( hInterpToggletool,     'state', 'off' );

    % Activate right clic context menu on first axes (salinity)
    % ---------------------------------------------------------
    set(hPlotAxes(1),'UIContextMenu', hQcCmenu);

    % Activate clic mouse menu on first axes (salinity) for next rbbox
    % ----------------------------------------------------------------
    set(hPlotAxes(1),'ButtonDownFcn', @QC_SelectCallback);
    
    % change cursor to crosshair aspect
    % ---------------------------------
    set( hMainFig, 'Pointer', 'crosshair');
    
    % -------------------------------------------------------------
    % nested function on mouse clic when QC toggle tool is selected
    % -------------------------------------------------------------
    function QC_SelectCallback(gcbo, eventdata)
      
      % disable ButtonMotion on main fig during select
      % prevent drawing to map
      % ----------------------------------------------
      set( hMainFig, 'WindowButtonMotionFcn', []);

      % Retrieve named application data
      % -------------------------------
      tsg = getappdata( hMainFig, 'tsg_data');

      % Selection of the data within the figure
      % ---------------------------------------
      point1    = get(gca,'CurrentPoint');    % button down detected
      finalRect = rbbox;                      % return figure units
      point2    = get(gca,'CurrentPoint');    % button up detected

      point1 = point1(1,1:2);                 % extract x and y
      point2 = point2(1,1:2);

      p1 = min(point1,point2);
      p2 = max(point1,point2);                % calculate locations

      % The following code is only executed if the left mouse button is clicked.
      % If the right mouse button is clicked, this code must not be
      % executed as the variable 'ind' will be emptied. And this variable
      % is used when the context menu (callback 'Qc') is called
      % -----------------------------------------------------------------
      if ~strcmp( get(gcf, 'SelectionType'), 'alt')

        % The QC is applied either on TSG data either on Sample data.
        % it depends if the Botte Toggle button has been cliked on
        % -----------------------------------------------------------
        if strcmp( get(hBottleToggletool, 'state'), 'on')

          % get index on selected zone
          % --------------------------
          ind = find(tsg.DAYD_SPL     > p1(1,1) & tsg.DAYD_SPL     < p2(1,1) & ...
                     tsg.SSPS_SPL_DIF > p1(1,2) & tsg.SSPS_SPL_DIF < p2(1,2));

          % Keep the information on the indices of the selected zone
          % --------------------------------------------------------
          tsg.rbboxind = ind .* ones(size(ind));
          
          % Modifiy the QC
          % --------------
          tsg.SSPS_SPL_QC(ind) = tsg.qc.active.Code;

          % Save the modifications
          % ----------------------
          setappdata( hMainFig, 'tsg_data', tsg);
          
          % Update sample QC in the _WS and _EXT records
          % --------------------------------------------
          updateSampleQC( hMainFig );

          % plot selected data with selected code
          % --------------------------------------
          plot_Correction( hMainFig, hPlotAxes);

        else

          % get index on selected zone
          % ---------------------------
          ind = find(tsg.DAYD > p1(1,1) & tsg.DAYD < p2(1,1) & ...
                     tsg.SSPS > p1(1,2) & tsg.SSPS < p2(1,2));

          % Keep the information on the indices of the selected zone
          % --------------------------------------------------------
          tsg.rbboxind = ind .* ones(size(ind));
          
          % Modifiy the QC
          % --------------
          tsg.SSPS_QC(ind) = tsg.qc.active.Code;

          % put last SSPS_QC in queue (Undo/Redo)
          % -------------------------------------
          tsg.queue = push( tsg.queue, tsg.SSPS_QC);

          % store QC in queue object, for undo
          % ----------------------------------
          tsg.queue = push(tsg.queue, tsg.SSPS_QC);

          % Save the modifications
          % ----------------------
          setappdata( hMainFig, 'tsg_data', tsg);

          % Draw plot 1 of the validation figure 
          % ------------------------------------
          plot_Validation( hMainFig, hPlotAxes, 1 );

          % refresh QC statistic panel
          % --------------------------
          display_QC( hMainFig, hPlotAxes );

          % enable undo menu
          % ----------------
          set(findobj('tag','UIMENU_UNDO'),'enable','on');
        end

        % As soon as a modification took place the data should be saved
        % -------------------------------------------------------------
        set( hSaveMenu, 'UserData', 'on' );

      end

      % enable ButtonMotion on main fig after select QC area
      % ----------------------------------------------------
      set( hMainFig, 'WindowButtonMotionFcn', @MouseMotion);

    end
  end

%% QC_OffMenuCallback .............................. Quality Control Module
  %----------------------------------------------------------------------
  % Callback function run when the QC toggle tool is released
  %----------------------------------------------------------------------
  function QC_OffMenuCallback(gcbo, eventdata)

    % Desactive right clic menu on first axes (salinity)
    % ---------------------------------------------------
    set(hPlotAxes(1),'UIContextMenu', []);
    
    % Desactive clic mouse menu (zoom) on first axes (salinity)
    % ----------------------------------------------------------
    set(hPlotAxes(1),'ButtonDownFcn', []);
    
    % Uipanel no more visible
    % -----------------------
    %set( hbgQc, 'Visible', 'off' );
       
    % cursor back to normal
    % ---------------------
    set(hMainFig,'Pointer','arrow');
    
  end

%% Qc context menu selected ........................ Quality Control Module
  %-----------------------------------------------------------
  % Callback function run when the QC context menu is selected
  %
  % Context menu used to attribute a QC to the TSG time series
  %
  %-----------------------------------------------------------
  function Qc(hObject, eventdata, key)

    % Retrieve Default Quality Code and Color
    % ---------------------------------------
    tsg    = getappdata( hMainFig, 'tsg_data');

    % get key and some values in hashtable
    % ------------------------------------
    code  = get(tsg.qc.hash, key, 'code');
    color = get(tsg.qc.hash, key, 'color');

    % set active code and color from selected context menu
    % ----------------------------------------------------
    tsg.qc.active.Code  = code;
    tsg.qc.active.Color = color;
    
    % Modify and plot the last selected tsg data
    % ------------------------------------------
    if ~isempty( tsg.rbboxind )

      if strcmp( get(hBottleToggletool, 'state'), 'on')

        tsg.SSPS_SPL_QC(tsg.rbboxind) = tsg.qc.active.Code;

        % Save tsg.SSPS_QC and tsg.qc.active.Code 
        % in the application data
        % ----------------------------------------
        setappdata( hMainFig, 'tsg_data', tsg );

        % Draw the 3 plots of the Correction figure
        % -----------------------------------------
        plot_Correction( hMainFig, hPlotAxes );

      else
        tsg.SSPS_QC(tsg.rbboxind) = tsg.qc.active.Code;

        % Save tsg.SSPS_QC in the application data
        % ----------------------------------------
        setappdata( hMainFig, 'tsg_data', tsg );
     
        % Draw plot 1 of the validation figure
        % ------------------------------------
        plot_Validation( hMainFig, hPlotAxes, 1 );
        
      end

    end

    % Update the radio button corresponding to the selected
    % QC context menu (rbg : RadioButtonGroup)
    % -----------------------------------------------------
    radioTag     = ['TAG_QC_RADIO_' key];        % Build the TAG of the CODE
    hbgChildren  = get(hbgQc,'Children');        % Get the handles of the rbg
    hbgTagCell   = get(hbgChildren, 'tag');      % get the TAG of the rbg
    ind          = strcmp(radioTag, hbgTagCell); % Compare the TAG
    hRadioButton = hbgChildren( ind == 1 );      % Get the handle of the button
    set(hbgQc, 'SelectedObject', hRadioButton);  % Make this button active

    setappdata( hMainFig, 'tsg_data', tsg );

  end

%% Radiobutton Quality Control ..................... Quality Control Module
  % ---------------------------------------------------------------
  % Callback to select CODE and COLOR QC from the RadioButton Group
  % ---------------------------------------------------------------
  function RadiobuttonQc(source, eventdata)
        
      % Retrieve Default Quality Code and Color
      % ---------------------------------------
      tsg = getappdata( hMainFig, 'tsg_data');
     
      % Retrieve the key from the active RadioButton
      % --------------------------------------------
      rbTag = get(eventdata.NewValue,'Tag');
      key = strrep(rbTag, 'TAG_QC_RADIO_', '');

      % store his handle to uibuttongroup userdata
      % ------------------------------------------
      set(hbgQc,'Userdata', eventdata.NewValue);
      
      % get key and some values in hashtable
      % ------------------------------------
      code  = get(tsg.qc.hash, key, 'code');
      color = get(tsg.qc.hash, key, 'color');
       
      % set active code and color from selected context menu
      % ----------------------------------------------------
      tsg.qc.active.Code  = code;
      tsg.qc.active.Color = color;

      setappdata( hMainFig, 'tsg_data', tsg );

  end

%% preQcPanCallback .................................Quality Control Module
  % ---------------------------------------------------------------
  % Callback function ... to be completed
  % ---------------------------------------------------------------
  function preQcPanCallback(obj, evd)

    set(hQCToggletool, 'state', 'off' );

  end

%% postQcPanCallback ............................... Quality Control Module
  % ---------------------------------------------------------------
  % Callback function ... to be completed
  % ---------------------------------------------------------------
  function postQcPanCallback(obj, evd)

    set(hQCToggletool, 'state', 'on' );

    % Set the right limit and interval to the 3 axes
    % ----------------------------------------------
    for iaxe = 1:3
      set(hPlotAxes(iaxe),'XTickMode','auto')
      datetick(hPlotAxes(iaxe),'x','keeplimits')
    end

  end

%% MouseMotion
  %---------------------------------------------------------------------
  % Callback function run when mouse pointer is moving on temperature plot
  % draw corresponding measurement position on map
  %---------------------------------------------------------------------
  function MouseMotion(hObject, eventdata)

    % Test if the callback can be activated
    % -------------------------------------
    if strcmp( get( hMainFig, 'UserData'), 'ButtonMotionOn')

      % Retrieve named application data
      % -------------------------------
      tsg = getappdata( hMainFig, 'tsg_data');

      % Get current position of cusor and return its coordinates in
      % axes with handle h_axes
      % -----------------------------------------------------------
      a = get(hPlotAxes(1), 'CurrentPoint');
      x = a(2,1);
      y = a(2,2);
      
      % Get the Limits of axes 1
      % ------------------------
      limx = get(hPlotAxes(1), 'XLim');
      limy = get(hPlotAxes(1), 'YLim');

      % Code to Activate the PAN function when QC mode is active
      % A PAN zone is defined in the bottom (10%) of PlotAxes(1)
      % 2 callback are needed : 
      %    1 - one to desactivate QC when Pan is set to on.
      %    2 - one to reactivate QC once the pan has been used.
      % ---------------------------------------------------------
      qcState = get(hQCToggletool,   'state' );
      if strcmp(qcState, 'on' );
        
        % Suppose that Y axes is increasing from the bottom to the top
        % ------------------------------------------------------------
        limy2 = limy(1) + (limy(2)-limy(1)) * 0.10;

        if  x > limx(1) && x < limx(2) &&  y <= limy2 && y >= limy(1)
          hPan = pan(hMainFig);
          set(hPan,'ActionPreCallback',  @preQcPanCallback);
          set(hPan,'ActionPostCallback', @postQcPanCallback);
          set(hPan,'Enable','on');
        else
          pan off
        end
      end
      
      % Dynamically display data in uicontrol
      % -------------------------------------
      if x > tsg.DAYD(1) && x < tsg.DAYD(end)
      %if  x > limx(1) && x < limx(2)

        indCursor = find( tsg.DAYD > x);
        set( hInfoDateText, 'String',...
          datestr(tsg.DAYD(indCursor(1)),'dd/mm/yyyy   HH:MM'));
        set( hInfoLatText,  'String', dd2dm(tsg.LATX(indCursor(1)),0));
        set( hInfoLongText, 'String', dd2dm(tsg.LONX(indCursor(1)),1));
        set( hInfoSSPSText, 'String', tsg.SSPS(indCursor(1)));
        set( hInfoSSJTText, 'String', tsg.SSJT(indCursor(1)));
        if ~isempty(tsg.SSTP)
          set( hInfoSSTPText, 'String', tsg.SSTP(indCursor(1)));
        end

        % Plot the position on the map if this one is active
        % --------------------------------------------------
        if strcmp( get(hMapPanel, 'Visible'), 'on')

          % Select the map axes
          % -------------------
          axes( hPlotAxes(4));

          if isempty( get(hMapPanel, 'UserData'))
            hMarker = m_line( tsg.LONX(indCursor(1)), tsg.LATX(indCursor(1)),...
                              'Marker','o','MarkerSize',5, ...
                              'Color','r', 'MarkerFaceColor','r');
            set(hMapPanel, 'UserData', hMarker)
          else
            delete(get(hMapPanel, 'UserData'));
            hMarker = m_line( ...
                             tsg.LONX(indCursor(1)), tsg.LATX(indCursor(1)),...
                             'Marker','o','MarkerSize',5, ...
                             'Color','r', 'MarkerFaceColor','r');
            set(hMapPanel, 'UserData', hMarker);
          end
          
        end
      end
    end
  end

%% Map_OffMenuCallback
  %---------------------------------------------------------------------
  % Callback function run when the Map tool bar item is unselected
  %---------------------------------------------------------------------
  function Map_OffMenuCallback(hObject, eventdata)
    
    %if ~isempty( get(hMapPanel, 'UserData'))
    %  delete(get(hMapPanel, 'UserData'));
    %end

    %hLines = findobj( hPlotAxes(4), 'Tag', 'TAG_AXES_MAP');
    %hLines = get( hPlotAxes(4), 'Children' );
    %if ~isempty( hLines )
    %  delete(hLines);
    %end
    
   % Make the earth map invisible
    % ----------------------------
    set(hMapPanel, 'Visible', 'off' ); 

  end

%% Map_OnMenuCallback
  %---------------------------------------------------------------------
  % Callback function run when the Map tool bar item is selected
  %---------------------------------------------------------------------
  function Map_OnMenuCallback(hObject, eventdata)
     
    % Desactivate Zoom and Pan toggle buttons
    % may be change in the futur ...
    % ---------------------------------------
    set(hZoomToggletool,  'state', 'off' );
    set(hPanToggletool,  'state', 'off' );

    % Make the earth map visible
    % --------------------------
    set(hMapPanel, 'Visible', 'on' );
    
    erase_Line( hPlotAxes, 4 );

    plot_map( hMainFig, hPlotAxes)
    
  end

%% Bottle_OnMenuCallback ................................ Correction Module
  %---------------------------------------------------------------------
  % Callback function run when the bootle push tool is selected
  %---------------------------------------------------------------------
  function Bottle_OnMenuCallback(hObject, eventdata)
    % Callback function run when the Bottle tool bar item is selected

    % Get the tsg structure
    % ---------------------
    tsg = getappdata(hMainFig, 'tsg_data');
    
    % Switch somme buttons
    % --------------------
    set( hZoomToggletool,       'state', 'off' );
    set( hQCToggletool,         'state', 'off' );
    set( hPanToggletool,        'state', 'off' );
    set( hMapToggletool,        'state',  'off' ); 
    set( hClimToggletool,       'Enable', 'off');
    set( hCalToggletool,        'enable', 'off' );
    set( hInterpToggletool,     'enable', 'off' );
    set( hTimelimitToggletool,  'enable', 'on' );

    % Activate uipanels
    % -----------------
    set( hpDateLimit,  'Visible', 'on' );
    set( hbgCorMethod, 'Visible', 'on' );

    % Test if tsg and sample data have been loaded
    % --------------------------------------------
    if ~isempty( tsg.SSPS_SPL )
      
      % Compute the sample-TSG differences
      % ----------------------------------
      diffTsgSample( hMainFig );
      
      % Plot in the 3 axes
      % ------------------
      plot_Correction( hMainFig, hPlotAxes );

      % Get the information on time limits of the time series
      % Write them in the uipanel
      % -----------------------------------------------------
      noNaN = tsg.DAYD(~isnan( tsg.DAYD ));
      set( hetDateMin, 'String', datestr(noNaN(1), 31));
      set( hetDateMax, 'String', datestr(noNaN(end), 31)); 

    else

      % Desactivate the corretion module
      % --------------------------------
      set( hBottleToggletool, 'state', 'off' );
      
      msgbox('Sample data not loaded in the program', 'modal');

    end
  end

%% Bottle_OffMenuCallback ............................... Correction module
  %---------------------------------------------------------------------
  % Callback function run when the bootle push tool is selected
  %---------------------------------------------------------------------
  function Bottle_OffMenuCallback(hObject, eventdata)
    
    % If necessary toggle off some buttons
    % ------------------------------------
    set( hZoomToggletool,      'state',  'off' );
    set( hQCToggletool,        'state',  'off' );
    set( hPanToggletool,       'state',  'off' );
    set( hMapToggletool,       'state',  'off' ); 
    set( hClimToggletool,      'enable', 'on');
    set( hCalToggletool,       'enable', 'on'  );
    set( hInterpToggletool,    'enable', 'on' );
    set( hTimelimitToggletool, 'enable', 'off' );
    
    % Desactivate some toolbar buttons
    % --------------------------------
    set( hpDateLimit,  'Visible', 'off' );
    set( hbgCorMethod, 'Visible', 'off' );

    % Desactivate Click Mouse on figure
    % ---------------------------------
    set( hMainFig, 'WindowButtonDownFcn', []);
     
    % Drawing only necessary if the Correction moduel has been activated
    % ------------------------------------------------------------------
    if ~isempty( tsg.SSPS_SPL )

      % Draw the 3 plots of the validation figure
      % -----------------------------------------
      plot_Validation( hMainFig, hPlotAxes, 1 );
      plot_Validation( hMainFig, hPlotAxes, 2 );
      plot_Validation( hMainFig, hPlotAxes, 3 );
    end

  end

%% CorCancelCallback .................................... Correction Module
  function CorCancelCallback(hObject, eventdata)